Steel-Lined PTFE Elbows

Steel-lined PTFE elbow is a special pipe fitting, typically used to change the direction of pipelines.

PTFE-lined elbows are mainly manufactured by isostatic molding and compression molding, and can also be produced by spray coating.They are mainly used for pipeline connection and conveying corrosive media and gases, widely applied in chemical, pharmaceutical, environmental protection, smelting, energy and other industries.

According to different bending angles, PTFE-lined elbows are usually divided into 90° elbows and 45° elbows.

• Nominal Diameter: DN15 – DN1200

• Nominal Pressure: 0.6 MPa, 1.0 MPa, 1.6 MPa, 150 LB, 300 LB

• Lining Material & Service Temperature:PFA (≤ 220 °C), PTFE (≤ 200 °C), ETFE (≤ 150 °C), PO & PE (≤ 80 °C)

• Steel Material: A105, SS304, SS316, SS316L

• Lining Process: Isostatic molding, Compression molding, Rotational molding, Spray coating

• Lining Inspection: 15–20 KV high-frequency spark test